Dienstag, 15. Januar 2013

Pimp my PKM Part 2 ~ Zenith Style (by KardeN)

P1010310_новый размер P1010311_новый размер

Once, in one of the back issues of the magazine "Murzilka" I discussed skirts the gun Kalashnikov.
Some time ago   I had to install a machine gun on one of our division ...
P1010039 P1010043 P1010051 P1010047 P1010046 P1010312_новый размер P1010313_новый размер
So, the kit consists of a forearm B-50 , the stock PT-2 , muzzle brake - compensator   DTK-1P and front handle RC-1 with bracket   B-25U ...
P1000689 P1000690
The fore-end is formed   when communicating between a three-piece ...
P1000734 P1000733 P1000727 P1000726 P1000725
Top, if desired, set the bar low for installing red dot scope.
Included are two sets of plastic spacers and screws of different lengths, mounting plates ...
P1000728 P1000730 P1000731 P1000732 dtk-1p_pulemet
Long set screws and spacers for installation on the forearm gun control panel ...
P1000722 b50_pul
Next the position of our hit parade - butt PT-2 ...
P1000691
The design uses a height-adjustable butt plate PT-1   Stripped suspension strap. Instead, on the fore-end dress   "Shoe" from the set of the GP-25 ...
P1000693
The buttstock is adjustable in length.
P1000692 P1000704 P1000699
Basic elements - the screw and two guides ...
P1000702 P1000701
The mount of the butt to the shank receiver gun ...
P1000696 P1000697 P1000695
  The mount to the shank   and bottom butt plate detached from the middle part of the butt ...
P1000705 P1000706 P1000708 P1000707
Butt cheek of PT-1 and staff are the AK pistol grip for easy anchoring.
The handle is a replacement lug regular stock ...
P1000737
Muzzle brake - compensator DTK-1P ...
  P1000717 P1000718
Front handle   RC-1 to B-25U adapter is designed for comfortable holding a machine gun mounted on the forearm and the B-50 ...
P1000710 P1000709 P1000711 P1000735 P1000736
We proceed to the assembly.
Disconnect the regular stock. The most difficult stage, because the screws expanded on the butt, and prevents beading insert a screwdriver into the slot nuts, and without the screw with the nut rotated ... etc. etc.
However, unscrewed the screws and set aside. Gun ready   to the assembly ...
DSC05910 DSC05911
Standard screws attach the butt ...
DSC05915
If desired, the stock can be shortened.
This option is available at remaking the machine gun in the layout Bullpap, or if you want to remove the stock to reduce the size of ...
DSC05927 DSC05925
Tying wall forearm so that notches in the side sections fore dressed to the spigot.
And tighten the six screws.
Pins - these are things tidy ...
DSC05919
Attach the bracket to the plate ...
DSC05920 DSC05922 DSC05926 DSC05928
In this case, the replacement barrel is impossible.  
As a way out   this situation, if the problem is urgent, you can set the bar B-12 ...
DSC05923 DSC05924
True, this ersatz - bit version of the rail on the right, as it is designed to fit in   complete with a machine-gun of.
But the barrel is replaced with no problems.
And in order to make a stable connection, you can make the right wall in the forearm and arm   one piece of T - shaped blanks.
Install the flame arrestor DTC.
To do this, remove the flash suppressor, the removal of which became a big problem ...
DSC05931
Tie, by the way, was not easy. This is because the trunks are usually served without removing the flash suppressor. With clear consequences ...
DSC05929
  Compensator has two notches to lock ...
P1000715
... Allowing it to set at an angle to counter diversion barrel when firing ...
DSC05934
Left stick handle ...
DSC05932
Italic version of the owner did not like guns. And as his hands were large and long, as he was, he had the usual and RC-1, shifted forward ...
P1010049
Well, "dopa".
Large flashlight   and IR laser pointer ...
P1010306_новый размер P1010307_новый размер P1010308_новый размер P1010309_новый размер
The fact that the gun is not left out in terms of attention tuning - this is very good.
To be able to replace the barrel during a collimator forearm can be "slightly" upgraded.
Our gunners, especially tall or especially - tall, most complaints brought the butt. Of course, it was designed   without the involvement of users.
But, as it turned out not all :)
Representative of the company in a conversation with me noticed that the stock was created for the "ordinary" people.
And our gunner, whom he knew personally, he asked him to convey to he looked at himself in the mirror and estimated its size :)
When extending the stock to the maximum he thoroughly backlash. No such good detail and pleasant to use as shoulder strap.
So my comments. Adjust the length of the stock could be used and the type of PT-1.
And instead of misleading when viewing satellite images CIA analysts, the second pistol grip, set the lines which gunner put any front handle with the container.
Or folding.   Or monososhku. Or do not put.
So God himself commanded to develop a folding butt. The more that overseas counterparts already have.   Well Pecheneg -2 with the butt of a place to be ...