TM "BUTEKS" visiting SWAT "Bulat" based in the suburbs

VV MVD ~08 (by 5224)

Kitlist:

RS Maska
RS Kazak 6 + plates
Sposn partizan sniper suit
Sposn old gen. PKM harness
Garsing "Spetsnaz" summer boots
PKM

RS ZSH-1-2m
RS Kora Kulon + plates
Sposn Gorka-E
Sposn old gen. AK+vog gunner harness
Garsing "Spetsnaz" summer boots
VFC ak74m + GP gp-25

Russlands härteste Truppe - unterwegs mit der Antiterroreinheit OMON

Tactical weapons belt M3 Debt (by KardeN)

Strap on Debt - M3 - a modernization of the famous belt Debt-M2 ...

The main differences - is the ability to bear arms behind his back in the manner of carrying weapons and biathlon to use as a standard two-point belt, but with the function of rapid adjustment of the length of the tape with podtyaga. Another new feature - the presence of weapons pursuit.
In addition to the standard version of the black component is available and the green belt.
Included is an additional carabiner for attaching the belt to the rear sling swivel arms.
Also, at the request of the belt can be ordered from the same carabiner carabiner belt 6SH5 ...

Consider wearing a belt with AK74M, RMB, SIDS, and SR2M SR3M.
Front mount - metal carabiner. As with the previous model ...

Rear Mount - strap with a buckle that allows you to mount its on the neck or on the butt butt, with additional girth through the butt plate.
If necessary, as the rear mount, you can use the additional metal carabiner ...

Since its installation on the machine stock company Zenith would prefer to use a rear-mount shotgun that you can quickly detach the front along with the rifle. This opportunity is not excessive in those cases where a weapon is not necessary at this point, it interferes with, or a trip to a halt.

Self belt remains in the body, which is important, because to put weapons on the belt gear (helmet, vest, unloading) - not a pleasant one.
The design of the belt allows you to use it as a two-point, three-point and single-point:

Belt is a loop in which vdeta buckle, through which, in turn, slide the strap called belt podtyaga, with a front mount ...

Average belt anchorage is obtained by floating with tape podtyaga it may move toward the trunk or stock.
Extending podtyaga tape in half, we transfer the midpoint of the belt loop to the area of ​​the receiver and obtain three-point version of the belt (suitable, for example, to patrol or shooting with one hand)

Fully extending the tape podtyaga, we displace the midpoint of the neck to the butt, the rear seat belt anchor point, and we get a one-point belt (c anchoring the opportunity to "strong" and "weak" shoulder) ...

Podtyaga shortening the tape to the end (for example, in the "automaton on the chest, muzzle down"), we shorten the overall length of the belt, tightly clasping arms to her chest, avoiding hanging out with the active movements of arms ...

From this position the arms easily moved into position "behind", which does not interfere with the use of broneschitov, stairs, overcoming obstacles, or the use of additional weapons.
Podtyaga tape is made of a soft, thin ribbon belt, which allows it to easily and without much resistance to slip in the buckle. The end of the lines is complex and triple stitched for easy hand grip, and is also travel stop tape, preventing it from slipping buckle.

With push-ups (poddevanii) buckle finger podtyaga tape, under the weight of weapons is easily extended.
As in the previous model, the belt loop of the main girth length remains constant at any position of the middle point of attachment.

There fasteks for rapid removal of the belt with a gun. He did not "sewn" firmly and fixed to the rafters with the clasps. This design makes it the belt is fully maintainable and allows you to build a belt on your own ...

Compared with the previous model main belt strap softer. This is done for the convenience of making a belt in the "biathlon" ...

Adjusting the length of the main lines has now become easier than the previous model on a belt. Now instead of operating with three buckles is enough for one "trehschelevki" ...

Finally - the author listened to my aspirations of the products and put into the design of a gun belt straps. It is long enough to cover the range of movement of the loop and only soft, to be more heavy weapons. In addition, it prevents rubbing the neck strap, which is very often the case when using body armor ...

Pillow equipped with a detachable Velcro loops with double overlap ...

Installation on the RMB

The front mount. As an option - may be the same rifle carbine unified belt ...

- Rear mount ...

- Two-point version of the ...

- Three-point version of the ...

- Conditional one-point version of the ...

Strap can be used as a standard two-point, but with the function of rapid adjustment of the length of the tape with podtyaga ...

This option is the most optimal for the gun, since there is no probability of the link runs along the lines of the body of machine-gun carrying handle ...
Would look like the machine gun position on the machine gunner in the two-point version of the ...

- Sling tucked ...

- Rear mount ...

- Conditional one-point option. Conditional - because for this option is not enough tape length podtyaga, which is made taking into account the distance between the swivel AK ...

- Three-point version of the ...

To quickly adjusting the length of the main loop, which interfere with mounting pads to the belt, you can make a loop with fasteksa ...

The use of a fastening belt at two points ...

- Tape podtyaga disbanded ...

Attaching to the butt ...

Tape podtyaga contracted ...

Use on SIDS

- The front attachment point ...

- The rear attachment point ...

- Two-point version of the ...

- Three-point version of the ...

The rifle in the figure. Two-point option. The rifle is attracted to the torso ...

- Belt bag ...

- Work tape podtyaga ...

You can crank out a rifle under his left arm behind his back and pull the tape podtyaga ...

Option worn on both shoulders ...

- The figure ...

Shoulder straps, front ...

- And back ...

- The front attachment point ...

Install belt on SR2M.

- No different complexity. Enough to secure the carabiner on the back belt podtyaga swivel ...

This method allows you to be carrying a submachine gun in the figure as high as possible so that it is not much hanging in the active movements. To bring the strap into the firing position is sufficient to delay the belt buckle podtyaga and drop their weapons to the required height ...

Installation on SR3M.

The front sling swivel ...

Attachment to the neck of the butt ...

Strap in "two-point" position ...

- "Singleton" status ...

- "Three-point" position ...

- A pillow ...

Well, briefly - what we have.

There is a belt with a universal bracket suitable for mounting on virtually all the domestic samples of combat weapons - submachine guns, machine guns, rifles and machine guns.

The design allows the seat belt comfortable not only shoot the weapon. but no less comfortable to carry it out for yourself. Including in conjunction with various backpacks, when the belt is under a backpack of weapons. In transitions to pull enough weapons to his chest, so that his hands were free, and the halts can unhook the front and rear of the carbines antabok and absolve themselves of their arms.

M2 belt I liked more than the last model M3. And do not even want to change your old belt to new one.
But the "shabby" it, as they say, "tasted all the delights of" a new belt. Long-awaited airbag minimizes discomfort when wearing heavy weapons, including the use of SIB, when the belt weapons all the time heading off the "armor" on the neck. Adjust the belt due to a soft sling has become more rapid. A collapsible design belt raised its maintainability and provided an opportunity to implement your own configuration options.